Converter (24/12) 21.3759-08 Pulse
Voltage Converter 21.3759-08 is intended for switching of different 12V devices (required stable voltage supply) to all 24 V vehicles.
It is a pulse converter with high efficiency.
Converters are manufactured on aluminum radiator which provides effective heat sink. It is equipped with a switch and LED output voltage indicator (of green color). Converter's scheme has protection against short circuit and output voltage excess (higher than 15V).
A set for mounting and commutation is included.
Converter should be switched to on-board electrical network. Switching to cold start and charging devices is prohibited.
1. Settle the Converter vertically on the metal base in protected against moisture place inside the car. Provide free air circulation and fasten the converter firmly.
2. Turn the switch on “0” position.
3. Connect “+24V” cable (green) of the converter to the “+24V” output of the vehicle using the cable with section not less than1.5mm2.
4. Connect “+12V” cable (red) of the converter to the “+” of the device using the cable with section not less than 2.0 mm2.
NOTE: For convenience and safe use terminals and sockets from the set.
5. To switch the converter settle the switch on “l” position. Green color of LED will show that the converter is ready for operation.
6. In case of operation error turn switch to “0” and then again to “l” position.
7. Turn switch to “0” at the end of converter operation