Installation and operation
1. Place indicator in convenient and visually controlled place (panel with thickness 1….4mm).
2. Make an opening with diameter 30….31mm and fix indicator case inside it.
3. Connect indicator mind the polarity:
Red – power supply “+”
Black – power supply “-”
To reduce brightness make blue cable connection (for example to the side lights). When the blue cable is not connected or connected to “-”- brightness is high. When it is connected to “+“ - brightness is low.
Operation description:
Calculation and time indication will start as soon as the power is supplied.
The fact of start is proved by blinking point on the right side.
When power supply is stopped, calculation and indication is also stopped and final values are saved in the indicator memory. Error is 1 second only.
Nullifying.
To nullify indicator memory connect white wire with mass for a short time.
Note: For convenience use a separate button for the white wire.
Operation Time Indicator IVN5-02 with casing waterproof (red light)
It is intended for measuring and display of operation time.
Indicator has four-digital led matrix of red color and and color smoothing function.
Indicator may be used as additional device for operation hours calculation (of electrical devices, vehicles, others).
Indicator has four-digital led matrix of red color and and color smoothing function.
Indicator may be used as additional device for operation hours calculation (of electrical devices, vehicles, others).
Подробнее
Description
Our company aim is to offer wide assortment of goods together with high level of service and quality.