Signallers REZVUN

Indicators are intended for operation in low-voltage DC. As soon as the power is supplied they produce sound signal. Indicators have built-in sound level and can be applied at cars of any brand to produce interrupted sound level warning about start of moving back (REZVUN 2, REZVUN 2-01, REZVUN 7-03, REZVUN 13, REZVUN 14), about doors not closed (REZVUN 3), and steady sound signal warning about break system disorder (REZVUN 11, REZVUN 12). Indicators REZVUN 6, REZVUN 10, REZVUN 10-01 are intended for sound indication. Indicators LIS 1 are intended for light indication. Indicators REZVUN 8, REZVUN 9 are intended for mixed sound and light indication in DC circuits. Connection of REZVUN 6 and LIS 1 is done through standard KRK5 socket. Indicators are intended for operation in DC low-circuits and after the power is supplied they produce sound signal (REZVUN 2, 2-01, 3, 6, 7-03, 10, 10-01, 11, 12, 13, 14) or mixed sound and light signal (REZVUN 8, 9). Indicators can be applied at cars of any brand to produce interrupted sound level warning about start of moving back (REZVUN 2, REZVUN 2-01, REZVUN 7-03, REZVUN 13, REZVUN 14), about lights are ON while the doors are open (REZVUN 3), and steady sound signal warning about break system disorder (REZVUN 11, REZVUN 12). To warn about some device has been turned ON indicators REZVUN 6, 8, 9, 10, 10-01 can be used. REZVUN 6 steady sound signal and connected through standard KRK5 socket. REZVUN 8-К and REZVUN 9-К have 2 or 16 different operation modes accordingly. To choose a mode one should connect corresponding wires. РREZVUN 10 and REZVUN 10-01 allow to reproduce already saved (on micro SD) sound files *.wav/16 kHtz/8bit to produce voice signal or different over sounds. It is possible to produce signalers with technical characteristics according to the customer demand. (level of sound, voltage, signal type, etc.)