Themo-Optimized Voltage Regulator 61.3702-05
Installation
1. Take the cap off the generator.
2. Take out regular regulator with brush unit.
3. Put thermo-optimized regulator with brush unit into generator and fasten it.
4. Pass the regulator cable through the vacant opening an the generator cap. Fasten the cap.
5. Fix the pins in the empty socket (the polarity does not matter).
6. Fasten the sensor with battery plus terminal.
ATTENTION: Do not damage the sensor!
7. Lay the thermosensor cable to the generator using the clamps (included in the set). Connect thermosensor socket with voltage regulator plug.
Common operation mode
1. Connect regulator socket (instead of thermosensor socket) with the socket of resistor ( blank plug).