Connection and installation
1. Choose convenient and visually controlled place for indicator installation (panel of 1...4mm thickness)
2. Perforate opening with 30...31 diameter and fix indicator case in it..
3. Connect indicator according to the table:
| Wire color | Application |
| Red | “+” of power supply (Battery) |
| Blue | “+” of ignition lock |
| Black | “Mass” |
Operation
After the power is supplied on the red wire indicator starts time calculation.
Time indication will start after the power is supplied on the blue wire.
Time indication will finish after the power is removed from the blue wire.
Setting of time
1. Close the white wire with “mass” for 2seconds to enter time setting mode. The last figure will start blinking.
2. Choose necessary value by closing the white wire with “mass” for a short time.
3. Pass to the next digit by closing the white wire with “mass” for a long time.
4. Repeat items 2 and 3 as many times as necessary.
Indicator will enter operation mode supposed no actions are performed within 10 seconds.
ATTENTION! It is prohibited to close the white wire with power supply circuit.
Note: Use separate button for the white wire for convenience.