While installation of indicator the battery must be switched OFF! |
1. Place indicator in convenient and visually controlled place.
2. Make an opening with Ø52 and fix indicator case inside it using a nut.
3. Place thermosensor in the place of temperature control.
Attention! It is prohibited to place the sensor in the liquid and aggressive substances.
4. Connect wires with indicator terminals, using 6.3 mm sockets.
Power supply minus to the “-” of indicator;
Power supply plus to the “+” of indicator;
Side lights plus to of indicator.
Thermosensor socket is connected without minding the polarity.
Note: “Lo” indication means that temperature has become lower than the limit or there is a breakage in the sensor circuit.
“Hi” indication means that temperature has become higher than the limit or there is a short circuit in the sensor circuit.