It is intended for digital display of vehicle speed.
It can indicate acceleration time from 0 to 100 km/hour supposed this time does not exceed 20 seconds. Time indication is fulfilled by five blinks after that indicator returns to speed indication mode.
Indicator has three-digital matrix of red color and uses speed sensor signal.
Application: 12V and 24V cars and tracks.
It can indicate acceleration time from 0 to 100 km/hour supposed this time does not exceed 20 seconds. Time indication is fulfilled by five blinks after that indicator returns to speed indication mode.
Indicator has three-digital matrix of red color and uses speed sensor signal.
Application: 12V and 24V cars and tracks.
Подробнее
Description
INSTALLATION AND OPERATION
1. Place indicator in convenient and visually controlled place (panel with thickness 1….4mm).
2. Make an opening with diameter 30….31mm and fix indicator case inside it.
3. Connect indicator according to the table:
Adjustment
For road safety it is necessary to provide indicator adjustment with the assistant only!
1. Start moving with constant speed equal to 20 km/hour, control the speed by speedometer, GPS, etc.
2. Assistant should connect white wire with mass once by short connection while the speed is 20 km/hour. Indicator will save in its memory speed value 20 km/hour.
3. Insulate white cable using any way at your choice.
Note: For convenience use a separate button for the white wire.
| While installation of indicator the battery must be switched OFF! |
1. Place indicator in convenient and visually controlled place (panel with thickness 1….4mm).
2. Make an opening with diameter 30….31mm and fix indicator case inside it.
3. Connect indicator according to the table:
| Wire color | Application |
| Red | “+” after ignition lock |
| Black | “Mass” |
| Blue | to speed sensor |
Adjustment
For road safety it is necessary to provide indicator adjustment with the assistant only!
1. Start moving with constant speed equal to 20 km/hour, control the speed by speedometer, GPS, etc.
2. Assistant should connect white wire with mass once by short connection while the speed is 20 km/hour. Indicator will save in its memory speed value 20 km/hour.
3. Insulate white cable using any way at your choice.
Note: For convenience use a separate button for the white wire.
Characteristics
| Indication Range | 0-999 |
| Supply Voltage, V | 8-30 |