It is intended for digital display of petrol engine (with different number of cylinders) rotation rate (see table 2).
Indicator has four-digital LED matrix of red color.
Connective wires and a wire for the choice of the operation mode are included in the set.
Application: 12V and 24V cars and tracks.
Indicator has four-digital LED matrix of red color.
Connective wires and a wire for the choice of the operation mode are included in the set.
Application: 12V and 24V cars and tracks.
Подробнее
Description
Installation
1. Chose convenient and visually controlled place for indicator installation (panel about 1...4mm).
2. Perforate an opening with diameter about 30...31 mm and fix indicator case inside it.
3. Connect indicator wires according to the table 1.
Table 1
4. Switch ignition ON
5. Chose necessary operation mode (see table 2) by short-time connection of the white wire with “Mass”. Operation mode number is displayed within 1 second. The chosen mode is saved in the indicator memory.
Table 2
1. Chose convenient and visually controlled place for indicator installation (panel about 1...4mm).
2. Perforate an opening with diameter about 30...31 mm and fix indicator case inside it.
3. Connect indicator wires according to the table 1.
Table 1
| Wire color | Application |
| Red | “+” after ignition lock |
| Black | “Mass” |
| Blue | Primary winding of the ignition coil |
4. Switch ignition ON
5. Chose necessary operation mode (see table 2) by short-time connection of the white wire with “Mass”. Operation mode number is displayed within 1 second. The chosen mode is saved in the indicator memory.
Table 2
| № of operation mode | cylinder/tact |
| 1 | 8/4; 4/2 |
| 2 | 6/4; 3/2 |
| 3 | 5/4 |
| 4 | 4/4; 2/2 |
| 5 | 3/4 |
| 6 | 2/4; 1/2 |
| 7 | 1/4 |