It is intended for digital display of DC current passing through shunt in one polarity.
Indicator has 8 operation modes for shunts of different nominal: 10А, 20А, 30А, 50А, 75А, 100А, 150А and 200А with voltage drop 75 mV.
Current measuring is possible only in the plus wire gap.
Indicator has three-digital matrix of red color. Connective wires are included I the set. Shunt is not included.
Application: 12V/24V cars and tracks.
Indicator has 8 operation modes for shunts of different nominal: 10А, 20А, 30А, 50А, 75А, 100А, 150А and 200А with voltage drop 75 mV.
Current measuring is possible only in the plus wire gap.
Indicator has three-digital matrix of red color. Connective wires are included I the set. Shunt is not included.
Application: 12V/24V cars and tracks.
Подробнее
Description
Installation and operation
1. Place indicator in convenient and visually controlled place (panel with thickness 1….4mm).
2. Make an opening with diameter 30….31mm and fix indicator case inside it.
4. Connect indicator according to the scheme:
It is prohibited to mix wires while connection! (shunt wire is marked)!
Connect shunt to indicator strictly before measured current and power supply!
4. Chose necessary operation mode by closing of white wire to the “mass”. The chosen mode is indicated within 1 second according to the shunt value and is saved in the indicator memory.
5. Insulate the wire using convenient means.
Attention! Incorrect connection or usage of indicator without the shunt will lead to indicator breakage.
| While installation of indicator the battery must be switched OFF! |
1. Place indicator in convenient and visually controlled place (panel with thickness 1….4mm).
2. Make an opening with diameter 30….31mm and fix indicator case inside it.
4. Connect indicator according to the scheme:
It is prohibited to mix wires while connection! (shunt wire is marked)!
Connect shunt to indicator strictly before measured current and power supply!
4. Chose necessary operation mode by closing of white wire to the “mass”. The chosen mode is indicated within 1 second according to the shunt value and is saved in the indicator memory.
5. Insulate the wire using convenient means.
Attention! Incorrect connection or usage of indicator without the shunt will lead to indicator breakage.
Characteristics
| Error, not more | 2 units of calculation |
| Supply Voltage, V | 10-30 |
| Consumption Current, not more, А | 0,035 |
| Discreteness, A | 0,1 (10А, 20А, 30А, 50А); 1 (75А, 100А, 150А, 200А) |
| Length of wire of operation mode choice, mm | 200 |
| Length of wire with shunt (with marking "shunt"), mm | 3000 |
| Supply Cable, mm | 1500 |
| Weight, not more, g | 70 |
| Dimensions, mm | Ø 34х17 |